14 Inch Brass Radha Krishna Idols – Standing Radha Madhav Pair on Separate Bases

At fourteen inches, this is no longer a shelf murti. It is the piece the rest of the mandir arranges itself around — and because Radha and Krishna stand on their own bases, you decide how they stand together.

Each murti is cast in [solid / hollow] brass and hand-finished in [antique / mirror polish / matte] by artisans in the traditional metal-casting workshops of [Moradabad / Aligarh / your sourcing town]. Larger castings are harder to get right: the metal has to fill evenly, the proportions have to hold at a height where every flaw is visible, and the finishing has to be worked across a far bigger surface. This is a size that separates careful workmanship from volume production, and it shows in the crown work, the jewellery, the fall of Radha's saree and the pleating of Krishna's dhoti — all cast into the metal, not painted on afterwards.

Krishna stands as Murlidhar with the flute raised, weight settled into the tribhanga bend that Vaishnav iconography has used for centuries. Radha stands beside him in a complementary posture. Sold as a matched Yugal Jodi set of two, each on its own base, so the pair reads as one composition while remaining two independent murtis.

Separate bases are the practical advantage here. You can widen or narrow the gap to suit your mandir width, turn each murti individually so both faces catch the diya light, place a Laddu Gopal, tulsi pot or kalash between them, and lift one at a time for abhishek or cleaning instead of manoeuvring a single heavy piece. For families who rearrange the mandir for Janmashtami, Radha Ashtami or a jhula setup, that flexibility matters.

Fourteen inches suits a floor-standing wooden mandir, a dedicated pooja room, a temple or satsang hall, a large drawing room console, or a business premises where the murti needs presence from across the room. It is also the size most often chosen for temple donation and for milestone gifting — a significant wedding, a griha pravesh, a landmark anniversary.

Handcrafted item. Small variations in weight, polish tone and detailing between pieces are natural and confirm the murtis were individually finished by an artisan.

---

Best Usage

• Main deity in a floor-standing or full-size wooden mandir, where a 6 or 8 inch murti would look undersized
• Dedicated pooja room as the presiding Radha Madhav pair, with smaller idols arranged around them
• Temple, ashram, satsang hall or bhajan mandali installation
• Temple donation — a common size for families sponsoring a murti at a local mandir
• Janmashtami and Radha Ashtami setups, including jhula, phool bangla and shringar decoration where the murtis are dressed
• Milestone gifting — 25th or 50th wedding anniversary, a daughter's or son's wedding, griha pravesh of an independent house
• Business premises — showroom entrance, factory pooja corner, office reception, hotel lobby
• Large drawing room or entrance console as a statement piece with devotional meaning
• Regular abhishek and shringar practice, where separate bases make handling each murti far easier

---

Benefits, Placement and How to Use

Benefits

Presence — At this height the murtis are visible and recognisable from across a room, which changes how a pooja room feels rather than just what it contains.

Flexible arrangement — Independent bases let you set the spacing, angle each murti separately, and add a Laddu Gopal, tulsi or kalash between them without disturbing the composition.

Easier handling — Two 14 inch murtis are far simpler to lift, bathe and clean one at a time than a single joined casting of the same total mass.

Devotional — Gives daily pooja, aarti and shringar a substantial focal point. Radha Krishna worship is traditionally associated with bhakti, household harmony and a settled mind during prayer.

Emotional — The Yugal Jodi is understood in tradition as an image of devotion and companionship, which is why it is so often installed at weddings, anniversaries and a move into a new home.

Longevity — Brass does not chip like resin or crack like marble-dust composites. Cared for normally, a murti of this weight stays in a family across generations.

These are traditional beliefs and cultural associations. No specific outcome is claimed or guaranteed.

Where to Place

• The ishaan kon (north-east corner) is the direction Vastu tradition most commonly recommends for a home mandir, with the murtis facing west or east so the devotee prays facing east or north
• Place on a sturdy chowki, mandir platform or wooden temple shelf rated for the combined weight — never directly on the floor, and never on a flimsy glass or acrylic shelf
• At 14 inches, position the murtis so the faces sit at eye level when you are seated for pooja
• Keep a small gap between the murtis and the wall behind, and enough clearance on both sides for aarti and shringar
• Spacing between Radha and Krishna: [4–6 inches] usually looks balanced; widen it if you are placing a Laddu Gopal or kalash between them
• Traditionally avoided: bedrooms as a main installation, space beneath a staircase, walls shared with a bathroom, and store rooms
• If the murtis will be dressed for shringar, allow extra width for the poshak and jewellery

How to Use

1. Rinse both murtis with clean water before the first installation, dry them completely, and place them on a fresh cloth on your mandir chowki.
2. Set the spacing and angle before the murtis are fully loaded with decoration — it is easier to adjust now than later.
3. Offer diya, dhoop, flowers and bhog as part of your regular ritual. Tulsi leaves are traditionally offered to Krishna.
4. Abhishek — brass is suitable for abhishek with water, milk, curd or panchamrit. Bathe one murti at a time, and dry each fully with a soft cloth afterwards. Residue left in the crown work and jewellery detailing is what dulls the surface, not the abhishek itself.
5. Weekly care — a dry cotton cloth for routine dusting. Pay attention to the crevices around the flute, crown and base, where dust settles first on a larger murti.
6. Deep cleaning — traditional methods work best: tamarind pulp, lemon with a pinch of salt, or besan mixed with a little curd. Work in sections on a murti this size, rinse with plain water and dry thoroughly before returning it to the mandir.
7. Never use — bleach, strong acids, steel scrubbers or abrasive powders. On an antique finish the damage is permanent.
8. Lifting — always lift from the base, never by the flute, arms or crown. Move one murti at a time.
9. A gradual darkening is normal brass patina. Many households leave it and polish only before Janmashtami and Diwali.

FAQs

1. Does the price include both Radha and Krishna, or only one idol?
Both murtis are included. This is sold as a complete Yugal Jodi set of two — one Radha and one Krishna — each on its own base. Nothing further needs to be ordered to complete the pair. If you require only one of the two, please contact us before placing the order.

2. How tall is each idol and how much does the set weigh?
Each murti stands 14 inches from the base to the tip of the crown. Individual weight is approximately [___ kg], with the pair together at roughly [___ kg]. As each piece is cast and hand-finished, weight differs slightly between units and between the two figures.

3. What does "separate idols" mean here?
Radha and Krishna are two independent murtis, each with its own base, rather than a single casting joined on one platform. You can set the gap between them, turn each one individually, place a Laddu Gopal or kalash in between, and lift one at a time for abhishek or cleaning.

4. How far apart should Radha and Krishna be placed?
There is no fixed rule. A gap of about [4–6 inches] looks balanced for murtis of this height, and most families keep them close enough to read as a pair. Widen the spacing if you intend to place a Laddu Gopal, tulsi pot or kalash between them, or if the murtis will be dressed in poshak.

5. Is the idol solid or hollow brass at this size?
This pair is [solid / hollow] brass. [At 14 inches, solid casting gives considerable weight and a very stable footing, suited to a permanent mandir installation. / At 14 inches, hollow casting keeps the murtis manageable to lift and reposition while retaining full brass thickness and detail.] The metal is genuine pital, not brass-plated alloy.

6. Can I perform abhishek on murtis this large?
Yes, and separate bases make it considerably easier — you bathe one murti at a time instead of handling a single heavy joined piece. Brass suits abhishek with water, milk, curd or panchamrit. Dry each murti completely afterwards, paying attention to crown work and jewellery detailing where residue collects.

7. What kind of mandir or platform does this size need?
A floor-standing wooden mandir, a full pooja room platform, or a sturdy chowki rated for the combined weight. Avoid glass, acrylic and lightweight wall shelves. Allow clearance on both sides for aarti and shringar, and position the murtis so the faces sit near eye level when you are seated.

8. Will the brass darken over time, and how do I clean pieces this large?
Brass darkens gradually through normal oxidation, and it is fully reversible. On a murti this size, clean in sections using tamarind pulp, lemon with a little salt, or besan with curd, rinse with plain water and dry thoroughly. Avoid bleach, strong acids, steel scrubbers and abrasive powders.

9. Which direction should these murtis face at home?
Vastu tradition most often recommends the ishaan kon, the north-east corner, with the murtis facing west or east so the devotee prays facing east or north. Keep them raised on a chowki or mandir platform rather than on the floor. These are widely followed customs, not rigid requirements.

10. Is this size suitable for gifting or temple donation?
It is one of the sizes most commonly chosen for both. Families sponsor murtis of this height at local mandirs, and it works for milestone occasions — a wedding, a 25th or 50th anniversary, or the griha pravesh of an independent house — where a small murti would not match the significance.

11. How are the idols packed, and can they be shipped safely?
Each murti is individually wrapped and cushioned, then packed together in a reinforced outer carton sized for the weight. Brass does not shatter, so transit damage is rare. For international orders, please note that the combined weight affects courier charges considerably at this size.